Utilities
Tie: The clove hitch knot is a knot pair anchored widely used for meetings. It has the advantage of being easy to develop and regulate, but has some drawbacks.
tends to sag, you should always stretch properly and locking carabiner. In the laboratory have comprobadoq ue this knot slip may have loads of 450Kg. This slippage could theoretically improve burden sharing between insurance and help the absorption of energy from a fall the first of the rope, but in practice, what I usually do is to damage the rope (sometimes very serious).
For optimum use the load out, which comes from the climber, should be placed along the axis of the carabiner, not the cam (otherwise, their resistance decreases).
When abseil scale tend to make two hitch, a carabiner to each triangle of forces. The clove is also used in the manufacture of rails, with the advantage of being able to adjust it, or to ensure material due to its easy creación.En winter mountaineering is used for the assembly of buried ice axes, tying a ribbon to the center of the ax. Elaboration
- buble Form two (one front and one behind)
- Cross loops, one in front of the other
- Pass the carabiner on both loops
- Adjust the knot
is possible to perform it with one hand (very useful for those who do not use tester or daisy chain)
- Pass a loop through the carabiner (this place is charging)
- Make another loop turning out
- clockwise loop to carabiner Chapar
- Adjust the knot
To ensure snow with an ice pick once made the clove hitch, the two ends must be oriented toward the direction of load.
find
should pay special attention to make this knot, as in case of error could be a knot of Alondra. Knots
equivalent or alternativeAlternatively there is a lump called single hook hitch, and superior results in terms of slippage, but more difficult in the creation and adjustment, or the knot of Eight although this does not allow an easy adjustment.
also buried the ax for using the knot Alondra
0 comments:
Post a Comment