Friday, November 28, 2008

Epson V500 Canoscan 8800f

Old Antique _PARTE II _ REPAIRS

despiesada Once the pen, if the problem is in the charging system, we will remove the glue tank and check that it is damaged or with holes if it is bad replace it, which must be carefully placed on the hub of the nozzle, it is advisable to seal with a solution of shellac diluted with alcohol, or sealant type Fastix
Both products should be placed in thin layer and make sure that, when dry, do not interfere with the subsequent placement of the body of the pen
In the case of the hydrometer, before removing the rubber tank, we will have reetirar the metal tube that covers it to be removed by rotating it while pulling it, usually comes easily
For these last, it can happen accidentally discards Jack hook in the photograph shown in the bottom right
In the case of this hook lever within the body of the pen and in both cases it is essential
remove

0 comments:

Post a Comment